How does the laser engraving machine work?
Publish Time: 2022-09-19 Origin: Site
The basic operation process of laser engraving machine
(I) Turn on the machine
1: open the water pump, air pump, so that the laser tube in the water cycle for 3 minutes
2: open the host power
3: open the fan power
4: open the laser power supply, use the test light key to detect whether the light
5: open the control software, detect whether the upper and lower left and right optical head movement.
6: put the workpiece, adjust the focal length, thicker materials cutting with 63.5mm = 2.5 "or 73.5 = 3" long focal length lens, fine carving with 50mm = 2 "short focal length lens.
7: Operate the computer to transfer files and start engraving.
(II) Shutdown
Turn off the laser power, host, fan, water pump, air pump in turn