New Type Energy Saving Industrial Drying Equipment Rotary Drum Dryer

The rotary cylinder drying system is composed of hot air type dnying media generation device (coal, oi, gas, steam, electricity), rotarycylinder dryer, separation equipment (combination of cyclone separator, bag filter, wet dust collector), fan, control system, etc. it isgenerally used for continuous operation and can be used for intermittent operaion such as calcination after modification.t is generaly used for continuous operation, but after modification it can be used for intermitent operation such as calcination. The newrotary cvinder drver is a combined copving structure with selfcleaning funcion added to the old rotary cvinder drver, which can handleviscous materials, paste-ike materials, and even liquid materials, and retains the advantages of large processing capacity and stableoperation of the rotary cylinder.

Applicable Materials

It is used for drying the materials with less viscosity or non-viscous materials and better liquidity under certain moisture content. Forexample: dnying of choline chloride powder, amino acid, solid white alcohol, palm ol residue, Conaldehyde residue, frui residue, livestockand poultry manure, quartz sand, dry-mixed mortar, sodium sulfate, ammonium sulfate, potassium sulfate, potassium chloride, slagmineral powder, etc.

Characteristics

1. According to the operating experience, the transmission device and the cylinder structure are improved, which greatly reduces the

equipment investment and power consumption.

2. According to the needs of the rotary cylinder dryer after transformaion to achieve the integrated design of drying, screening, retur

material.3. lmprove the structure of the equipment to avoid the low thermal eficiency of drying caused by air leakage and poor material lifting4. Simple operation, stable operation and long life of the equipment.

5. Low running cost and high thermal efficiency.

6. Good product quality and high output of single machine.

Working Principle

The dryer is equipped with combined copying plate sructure inside, which has sel-cleaning function. When the wet material enters thedryer, the high wet material is copied by the rotating When the wet material enters the dryer,the highly wet material is copied to the top bythe copying plate on the rotating cylinder wall and falls down, and the movement is generated along the combined copying plate while thecylinder is rotating. The materials on the inner wall of the cylinder and the surface of the plate are cleaned up automaticaly without addingextra power device, which efectively overcomes the shortcomings of material scaring, sticking to the wal and producing large pieces.This effectively overcomes the shortcomings of material scaring, sticking to the wall and producing large pieces. in the process ofrepeatedly copying up and faling down,the material is in fullcontact with the hot air to complete heat and mass transfer and realize thedrying process, Drying process.