CO2 Laser Engraver for Jewelry

CO2 laser engraving machine is a type of laser etching system for jewelry of wood, stone, glass, acrylic, plastic, and more nonmetal materials.

The carbon dioxide laser engraving machine is an engraving machine that uses carbon dioxide laser technology. This type of laser equipment is a general-purpose model with small size, rear focus mode, and a relatively high degree of integration.

The laser is transmitted through the optical mechanism and focused on the surface of the material. The material with high energy density laser concentrated at one point will quickly vaporize. Use the computer to drive the laser head to move through the X-Y console and control the laser switch as required. The image information processed by the software exists in the computer in a certain way. When the computer reads information from it in order, the laser head will move along The scanned trajectory scans back and forth line by line from left to right and from top to bottom.

Whenever scanning "1", the laser will turn on, when scanning to "0", the laser will automatically turn off. The information of the computer is stored in binary form, which coincides with the 2 states of the laser switch.

Features & Advantages

• Wide range: Carbon dioxide laser can engrave and cut any non-metallic materials. And the price is relatively low.

• Safe and reliable: Engraving in a non-contact manner will not affect the material. There will be no "knife marks", no damage to the surface of the workpiece, no deformation of the material, and so on.

• Accurate and meticulous: The engraving accuracy can be 0.02mm.

• Saving and environmental protection: The diameter of the light beam and the spot is small, generally less than 0.5mm, which saves materials, and is safe and sanitary.

• The same effect: Guarantee the same etching effect of the same product.

• High speed: you can immediately engrave and cut according to the pattern output by the computer.

• Low cost: Because it is not limited by the etching quantity, laser engraving is relatively cheap for small batch engraving services.