How does the laser engraving machine work?

The basic operation process of laser engraving machine

(I) Turn on the machine

1: open the water pump, air pump, so that the laser tube in the water cycle for 3 minutes

2: open the host power

3: open the fan power

4: open the laser power supply, use the test light key to detect whether the light

5: open the control software, detect whether the upper and lower left and right optical head movement.

6: put the workpiece, adjust the focal length, thicker materials cutting with 63.5mm = 2.5 "or 73.5 = 3" long focal length lens, fine carving with 50mm = 2 "short focal length lens.

7: Operate the computer to transfer files and start engraving.

(II) Shutdown

Turn off the laser power, host, fan, water pump, air pump in turn