Views: 0 Author: Site Editor Publish Time: 2024-12-12 Origin: Site
Material engraving machine in the glass to do relief techniques:
Glass is fragile items, so when fixing the glass must pay attention to, it is best to under the platen and then pad a layer of thin wood or PVC board.
After doing the preparatory work, start to knife, knife before you must pay attention to the first carving and milling machine spindle rotation, fast contact with the surface of the glass, use the micro-adjustment, each time the falling knife control in the following 0.1 mm.
On the Z direction to find the origin of the work, it is best to move the tool to the middle of the whole piece of glass, in this position to determine the origin of Z, carving out the depth is more uniform.
After carving, stone engraving machine table glass debris should be cleaned up in a timely manner, rinse with water can be, so as not to accidentally puncture the hand.