1. Good cutting quality. The width of the notch is narrow (generally 0.1-0.5mm), the accuracy is high (generally the error of hole center distance is 0.1-0.4mm, the error of contour dimension is 0.1-0.5mm), and the roughness of the notch surface is good (generally RA is 12.5-25) μ m) Generally, the

(1) High precision, fast speed, narrow slit, small heat affected area, smooth cutting surface without burr. (2) Laser cutting head will not contact with the surface of the material, not scratch the workpiece. (3) The slit is narrow, the heat affected area is very small, the local deformation of the workpiece is very small, and there is no mechanical deformation. (4) Flexible processing, can process arbitrary graphics, can also cut pipes and other profiles. (5) Can be steel plate, stainless steel, aluminum alloy plate, hard alloy and other materials of any hardness without deformation cutting.

The parameters that affect the cutting quality are: cutting height, cutting nozzle type, focusing position, cutting power, cutting frequency, cutting duty ratio, cutting pressure and cutting speed. The hardware conditions are: protective lens, gas purity, plate quality, aggregation mirror and collim

Fiber laser cutting machine can cut stainless steel, alloy steel, carbon steel, aluminum and alloy and other metal materials;  Lasers can cut organic materials such as plastics (polymers), rubber, wood, paper products, leather and natural synthetic fabrics, as well as inorganic materials such as quartz and ceramics, as well as new lightweight reinforced fiber polymers

Cutting using method:[1] General cutting: general plasma cutting without protective gas, working gas and cutting gas from the same nozzle. When the arc is started, small airflow ion gas is ejected as ionization medium; When cutting, large airflow of gas is spewed out at the same time to remove the m