Laser machine and cutting machine, engraving machine difference

Difference between laser cutting machine and laser engraving machine:

A laser machine is a machine that uses a laser for processing, which can be used for cutting and engraving

Cutting machine is the machine that cuts various materials apart, can be done with a laser or spindle

Engraving machine is to refer to a variety of materials carved out of a variety of patterns of the machine, can be completed with a laser or spindle

Our Speciality chiller matches all three names of machines for a long time, taking away their heat so they can work properly.Laser machines are categorised and called by the tool used, and cutters and engravers are categorised and called by their function.

Laser cutting is the process of focusing the laser light emitted from the laser, through the optical circuit system, into a high power density laser beam.Laser beam irradiation to the surface of the workpiece, so that the workpiece to reach the melting point or boiling point, at the same time with the beam coaxial high-pressure gas will be melted or gasification of the metal blown away.As the beam moves relative to the position of the workpiece, it eventually creates a slit in the material, which results in a cut.

The laser engraving machine can improve the efficiency of engraving, make the surface of the engraved place smooth and rounded, rapidly reduce the temperature of the engraved non-metallic material, and reduce the deformation and internal stress of the engraved object; it can be widely used in the field of fine engraving of various non-metallic materials.

Knowledge Expansion

Laser cutting process is an invisible light beam instead of the traditional mechanical knife, with high precision, fast cutting, not limited to the cutting pattern limitations, automatic layout to save materials, smooth incision, low processing costs and other characteristics, will gradually improve or replace in the traditional metal cutting process equipment.The mechanical part of the laser cutter head has no contact with the workpiece, and will not cause scratches on the surface of the workpiece during the work; the laser cutting speed is fast, the kerf is smooth and even, and generally does not require subsequent processing; the cutting heat-affected zone is small, the plate deformation is small, and the cutting slit is narrow (0.1mm~0.3mm); there is no mechanical stress on the kerf, and there is no shear burr; the processing precision is high, and the reproducibility is good, and it does not damage the surface of the material; the numerical control programming, it can process theArbitrary planogram, can cut the whole plate with a large width, no need to open the mould, economic and time-saving.