cnc milling machine maintenance methods and three different control methods to share

Engraving and milling machine is a kind of machine tool that can both engrave and mill, it is assembled on the basis of engraving machine with more powerful spindle and better performance servo motor, and at the same time, it strengthens the load force of the bed, which enhances the precision when processing. The cutting ability of this model is stronger, the machining precision is very high, can directly process the hardness of the material above HRC60, a molding.

In the process of using the engraving and milling machine, its parts also need careful maintenance, especially in the following aspects:

1. in the operation, to ensure that the surface of the guide rail is clean, do not have debris, abrasive particles, etc. fall on it, if there will increase the friction of the guide rail, which will lead to rust and so on.

2. the guide needs us to keep lubricated, to avoid problems such as trade friction, resulting in rising operating temperatures. The guide rail is generally automatic lubrication, if you find no lubrication between the rails, you need to check the diverter valve. Regularly check whether the oil pump can start and stop regularly, and pay attention to whether to provide lubricant when starting.

3. in the process of use, the user should always pay attention to its operating status, do a good job of regular maintenance to keep running, extend its service life, to ensure the quality of engraving and milling.

In addition, in use, if you need to process graphite and ceramics, please use graphite engraving and milling machine, because processing graphite and ceramic materials, processing dust, easy to enter the guide rail, affecting the service life.

Here are three different control methods for engraving and milling machines:

1. Computer control: this is a very convenient way of control, because it is only necessary to enter the designed parameters into the computer, and then the computer itself will operate according to the instructions of the program. Staff only need to supervise from the side, very convenient.

2. USB input: the use of the system's own memory, the data input from the USB for processing and operation. As long as the completion of the file is saved, there is no need to use a computer for control. The advantage of this type of control is that the USB is very convenient to carry.

3. microcontroller control: this is a relatively rare way. The principle of operation in fact and the computer is almost the same way, but in the typesetting work, the use of microcontroller-controlled equipment can also work. That is to say that the two steps can be carried out at the same time.