Mold Making refers to the processing of molding and blank making tools, in addition to shear dies and die cutting dies. Usually, the mold has two parts: the upper mold and the lower mold. A steel plate is placed between the upper and lower dies and the material is formed under the action of a press.

Yin carving, Yang carvingThe so-called “yin carving” means: after carving in the carving material is left on the concave text or pattern.The so-called “yang carving” means: after carving in the carving material is left on the raised text or pattern, commonly known as the Yang character or Yang figur

Before operation, check whether the handle of each part of the woodworking engraving machine is normal, fill lubricating oil according to regulations, and low-speed test run for 1~2 minutes before operation.Before work should wear good work clothes, female workers should wear a work cap, operation i

The blade of the carving knife is very sharp, and you can't touch the blade part when you are loading and unloading the knife, so as not to hurt your hand.The various rotary motion parts of the machine can not be touched during the movement, including the spindle, tool and other parts. Especially hi

Driving system introductionAt present, the engraving machine drive system is mainly divided into two categories of stepping system and self-service system, the stepping system dominates this reason to affordable to meet the general customer requirements, the stepping system belongs to the semi-close