(1) Use AUTOCAD drawing or use the existing Solidworks file directly converted to DXF format;(2) DXF format or DWG format parts drawing imported into FastCAM software for nesting, conversion, output CNC NC programme (generally G code, there are also EESI format code), in order to facilitate the call

The operator follows the following sequence of switching on and off the machine every day:(1) Start the air compressor and air dryer;(2) Start the machine control cabinet; start the plasma power supply;(3) Start the programme for cutting after setting all parameters;(4) Switch off all power and air

In general, when the working air pressure is lower than the required air pressure value of the equipment, the air compressor input air flow is less than the specified value, the plasma arc will be weakened at this time, and then can not form a high-energy, high-speed plasma arc, resulting in poor qu

Hazards of CNC plasma cutting machines● Operation and maintenance of automated equipment involves potential hazards, and the operator should exercise caution to prevent injury by● Limbs may become entangled or even injured if they come into contact with a moving machine;● Keep hands and feet away fr

The plasma cutting used in the market will choose different working gases according to the different cutting materials, of which the most widely used is air plasma cutting.Here you need to use plasma cutting supporting air compressor to assist the use of plasma cutting machine, then about the choice