When you receive the CNC router, you should unpack and inspect the machine. After turning on the power, carefully check whether there is any damage to the appearance and whether it has been damaged by impact during transportation. If it is in good condition, please check the machine configuration of

1. Clean the dust in the electrical box regularly (according to the usage), check whether the wiring terminals and the screws of each component are loose, to ensure the safe and reliable use of the circuit.2. After the machine is used every time or tomorrow, be sure to clean up the dust and debris o

Design and typesetting according to requirements. After calculating the path correctly, save the generated tool path as a different file.2. After checking that the path is correct, open the path file in the CNC control system (preview available).3. Fix the material and define the origin of the work

Step 1. Setup the machine frame.1.1. Open the packing box and check whether the appearance of the machine is intact;1.2. Count the physical objects according to the packing list;1.3. Place the machine with the four feet below on the base steadily;1.4. Adjust the four feet to make them land on the gr

Consult: we will recommend the right machine to you after being informed by your requirements, such as the material you want to carve, the max size of the material (Length x Width x Thickness).2. Quotation: We will send you free quote according to your required machine with affordable price.3. Proc