The principle of carbon dioxide laser cutting machine is to use the vibration of carbon dioxide molecules and the transition between rotating energy levels to produce laser.The discharge tube of carbon oxide laser is filled with mixed gases such as carbon oxide, whose ratio and total pressure can va

The basic operation process of laser engraving machine(A) Turn on the machine1: open the water pump, air pump, so that the laser tube in the water cycle for 3 minutes2: open the host power3: open the fan power4: open the laser power supply, use the test light key to detect whether the light5: open t

Precautions for use1. It must be used under good circulating water cooling conditions.2. Laser power supply with reliable performance must be provided.3. Wiring shall be reliably insulated.